The Xone:3D is a unique performance DJ controller that for the first time enables the seamless integration of computer-based digital media into the traditional DJ workspace. Combining a fully featured, high specification professional analogue DJ mixer with a comprehensive MIDI control system and a high end multi-channel USB soundcard, the Xone:3D has been designed in conjunction with some of the worlds most cutting-edge DJ/producers.
Features
Mixer:
4 multi-input stereo channels: RIAA preamps for turntables on 4 inputs
3-band total kill EQ: +6dB to off
2 FX sends: pre/post selection (internal on FX2)
2 stereo returns
Headphone monitor with mix/cue control: 3.5mm and Ό sockets
2 analogue VCF filters: low-pass, band-pass, high-pass, resonance frequency, and filter on switch
Assignable LFO with depth control
Mic input: On XLR connector; gain control and 2-band EQ control available
Power supply: High performance internal switch-mode supply
RIAA: for THREE turntables (four via internal jumper link)
Dual Rail VCA Cross Fader
USB SoundCard:
Uses 24 bit stereo Analogue to Digital converters and Digital to Analogue converters (not lower spec CODECs)
Sample rate can be set to either 44.1kHz or 48kHz; interfaces to any digital audio source up to 192kHz
Soundcard fed from main mix, FX1, or direct from channels
8 channels - either 6 channels from a PC and 2 returns or 4 channels from a PC and 4 returns.
Sends - mix, FX, or individual analogue channels may be routed to PC or digital outputs
MIDI Controller:
Mappable MIDI controls:
105 MIDI control messages available
8 x 60mm linear faders
16 x detented rotary pots
10 rotary encoders, 50 switches, 2 custom jog wheels with micro switches
8 illuminated push switches
Multi-function jog wheels with switched navigation control
Xone:3D is compatible with any PC software that has MIDI assignable functions: for instance, lighting controller or visual effects programs
Technical Data
Main Outputs: +4dBu XLR Headroom +22dB
Booth Output: 0dBu Jack Headroom +22dB
Effect Send output:-2dBu Headroom +22dB
Maximum output: +26dBu
Mic Pre-Amp Sensitivity: -45 to -15dBu
RIAA input sensitivity: 7-100mV 47K/330pF
Stereo Line input sensitivity: -10 to +8dBu
Frequency Response (20Hz-30KHz):
Mic to Main output: (+40 dB) +0/-12dB(lo-cut filter)
Line to Main output: (0dB) +0/-2dB
Distortion at 1KHz +0VU out
THD + Noise (mic in +40dB gain) <0.04%
THD + Noise (line in 0dB gain) <0.02%
Common Mode Rejection @1KHz:
Mic Input +40dB gain >-50dB
Crosstalk @1KHz:
Adjacent Channel <-90dB
Mute Shutoff N/A
Fader Shutoff <-90dB
Noise Performance (22Hz-22KHz unweighted)
Mic EIN with 150ohm source -126dB
Residual output noise: - main outputs <-97dBu
Main Mix noise: <-80dBu (84dB S/N)
Connection Impedances:
Mic Inputs: <2K5 ohms
Line Inputs: >15K ohms
Outputs: <47 ohms
Record out N/A
Equalisation:
Gain (each band) Stereo EQ +6dB/OFF 3 BAND TOTAL KILL
Gain (each band) Mono (mic) EQ +/- 12dB
Filter 30Hz-20KHz Dual VCF with LFO
Metering:
Reading referred to Main outputs 0VU = +4dBu (9 point channel, 9 point master)
Peak indication threshold 10dB before clipping
System:
Power supply: Internal Universal input
Power Consumption: 30W Max 20W nomina
Dimensions: 358 x 483 x 88 mm
Weight: 6 kg
 |
Immagini aggiuntive |
| |
|
|
|
Mixer 
