Testa Mobile Futurelight PHS-200 DMX, Soundmix

Testa Mobile Futurelight PHS-200 DMX

CARATTERISTICHE TECNICHE

FUTURELIGHT PHS-200 PRO-Head SPOT

DMX-controlled operation or stand alone operation with Master/Slave-function

48 preprogrammed scenes in Program Run for stand alone operation

Number of scenes in Program Run can be changed individually

The scenes in Program Run can be modified via the Control Board or via an external controller and loaded into the memory

8 built-in programs can be called up via DMX-controller

Sound-controlled via built-in microphone

9 brilliant, dichroic colours plus white

Switchable colour change (mode 1: only full colours, mode 2: colour-change at every position)

Rainbow-effect with adjustable speed in both directions

Gobo-wheel with 7 rotating gobos plus open

With gobo-shake function

Manual focus

Strobe-effect with 1-10 flashes per second

Mechanic dimmer

Positioning within 360° Pan and 265° Tilt

Lightbeam with 13° radiation angle

Control-Board with 4-digit display and foil-keyboard for adjusting the DMX-starting address, Pan/Tilt-Reverse, Program, Reset, lamp on/off

For MSD/HSD 250 or MSD 250/2 lamp

DMX-control via every standard DMX-controller

Power supply:	230 V AC, 50 Hz ~
Power consumption:	400 W
DMX-control-channels:	8
DMX-512-connection:	3-pin XLR
Flash-rate:	10 Hz
Colour-wheel:	9 dichroic filters and open
Rotating gobo-wheel:	7 gobos and open
Outside diameter of the gobos:	25 mm
Image diameter of the gobos:	20 mm
Maximum PAN-movement 360°:	in 2.0 s
Maximum TILT-movement 265°:	in 1.5 s
Length of base:	380 mm
Width of yoke:	330 mm
Height (head horizontal):	450 mm
Peso(net):	15 kg

Invia ad un amico